Calibration and Characterization
Do you need to calibrate your printer or characterize your press?
Then you've come to the right place with the right software.
Introduction to calibration and characterization
To establish the ICC profile of a printer, you must first choose the paper and ink for the printe...
Create a profile from a standard test pattern
This tutorial explains how to create a printing profile starting from a standard test chart witho...
Create a profile from a calibration
(On going redaction) This tutorial explains how to create a custom profile with a calibration st...
Print an RGB test pattern
Do not neglect the printing stages of the test charts! Be meticulous.This tutorial explains how t...
Create an icc profile from an average of measured charts
Creating a characterization profile from measurements taken on a sample of several test charts is...
Customization of charters
If the standard pattern format does not suit you, Coraye allows you to customize your chart to su...
Importing a measurement file made with the XRite I1 Profiler software
If you use an XRite spectrophotometer (I1 Pro, I1 Pro 2, I1 Pro 3 & 3+ or an IO table) that does ...
Export of a measurement file made with Coraye to the XRite I1 Profiler software
Just as it is possible to import measurement files from XRite I1 Profiler to Coraye to calculate ...
Barbieri Gateway & Chart Generator
Another way to interface with Barbieri spectrophotometers is to exchange files with the Gateway s...
Characterization of a backlit in transparent mode with the I1 Pro 3 + XRite
Here is a more economical, less fragile and more "transportable" alternative solution than the im...