Creating a Print Control File for Normalized CMYK Proof

Before checking a proof test, it is necessary to create a "Print Control" .pctrl file corresponding to the type of range to be measured and containing the reference values.


Launch of the Print Control module

Click on the " Print Control " icon located at the top left

Then click on the button " Create a reference "

image-1629194908353.png

Select the CMYK color space

Printing standards in Graphic Arts are defined in the CMYK color space

image-1629194972107.png

The list of standardized ranges appears

image-1629195020632.png

To help you find your reference range, write the name of the standard you want to control in the search bar.
Then select the type of range you want to control.

As the use of Fogra charters is not free, it is necessary to purchase the "Fogra" option to access "Mediawedge Fogra".

image-1629195095809.png

Click on the " Use original Labs " button to associate the Lab reference values corresponding to the selected standard.

Print Control Mediawedge.png

A Preview of the range is displayed and it is possible to customize the format of the chart using the editing tools located on the right.
The custom format will be retained when creating the Print Control file

To find out more, see the chapter: Customizing the charters

To test the pattern, you can export it in Tif or Pdf format.

Print control Mediawedge edit.png

Then click "Next"

Creating the Print Control File

In this new window, fill in the "Name" field, then click on the "Save and quit" button
The Print Control file will appear in the left column.

The other fields are optional, they are only used to add information when you are going to create the measurement reports.

Info Print Control.png

Editing tolerances

Standard targets such as Mediawedges Fogra, IDEAlliance, etc... are already associated with tolerance values.
However, it is possible to modify them, delete or add new tolerances.

The edition of the tolerances can only be done when no control measurement has been carried out.

Tolerance Print Control.png

To find out more, refer to the chapter: Editing tolerances

Mediawedge control

To start the Fogra Mediawedge control, right click and select "Start control" to start the measurement.
To save the Print Control file in .pctrl format, right-click and select "Export"

Print Control.png

To learn more, see the chapter: Controlling a CMYK Mediawedge


Revision #2
Created Mon, Sep 6, 2021 2:07 PM by Lionel WETTEREN
Updated Fri, Nov 18, 2022 12:38 PM by Lionel WETTEREN